Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual page 38

Connecting Interface Cables
Figure 3-11
1
Connect to copper Ethernet ports to be used for network connections. Copper
Step 5
Ethernet ports are available both in Slot 0 and Slot 1.
Note
a.
Cisco ASA 5500 Series Getting Started Guide
3-16
Connecting to the AUX Port
FLASH
1
2
RJ-45 AUX port
You must use a port in Slot 0 for the inside interface, and a port in Slot 1
for the outside interface.
Connect one end of an Ethernet cable to a copper Ethernet port, as shown in
Figure 3-12 and Figure
2
RJ-45 to DB-9 console cable
3-13.
Chapter 3 Installing the ASA 5550
78-19186-01