Specifying A Group Policy - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Implementing the Cisco SSL VPN Scenario
Step 2
Step 3

Specifying a Group Policy

Step 1
Cisco ASA 5500 Series Getting Started Guide
10-8
Chapter 10
In this dialog box, specify the following:
A server group name
–
The Authentication Protocol to be used (RADIUS, TACACS, SDI, NT,
–
Kerberos, LDAP)
IP address of the AAA server
–
Interface of the adaptive security appliance
–
Secret key to be used when communicating with the AAA server
–
Click OK.
d.
If you have chosen to authenticate users with the local user database, you can
create new user accounts here. You can also add users later using the ASDM
configuration interface.
To add a new user, enter a username and password, and then click Add.
When you have finished adding new users, click Next to continue.
In Step 4 of the SSL VPN Wizard, specify a group policy by performing the
following steps:
Click the Create new group policy radio button and specify a group name.
OR
Click the Modify an existing group policy radio button and choose a group from
the drop-down list.
Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
78-19186-01