Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual page 59

Chapter 5 Installing Optional SSMs
Figure 5-4
1
2
Do not remove the optical port plugs from the SFP until you are ready to connect
Caution
the cables.
Remove the Optical port plug; then connect the network cable to the SFP module.
Step 2
Connect the other end of the cable to your network. For more information on
Step 3
connecting the cables, see
5500, ASA 5510, ASA 5520, and ASA 5540 Platforms."
The latching mechanism used on many SFPs locks them into place when cables
Caution
are connected. Do not pull on the cabling in an attempt to remove the SFP.
78-19186-01
Installing an SFP Module
3
1
Optical port plug 3
SFP port slot
Chapter 6, "Connecting Interface Cables on the ASA
2
SFP module
Cisco ASA 5500 Series Getting Started Guide
Cisco 4GE SSM
5-7