What To Do Next - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Chapter 12 Scenario: Site-to-Site VPN Configuration

What to Do Next

78-19186-01
debug crypto ipsec sa
•
debug crypto isakmp sa
•
See also the Cisco ASA 5500 Series Command Reference for detailed information
about each of these commands.
If you are deploying the adaptive security appliance only in a site-to-site VPN
environment, then you have completed the initial configuration. In addition, you
may want to consider performing some of the following steps.
To Do This...
Refine configuration and configure
optional and advanced features
Learn about daily operations
You can configure the adaptive security appliance for more than one application.
The following sections provide configuration procedures for other common
applications of the adaptive security appliance.
To Do This...
Configure a remote-access VPN
Configure a clientless (browser-based)
SSL VPN
Configure an SSL VPN for the Cisco
AnyConnect software client
See...
Cisco ASA 5500 Series Configuration
Guide using the CLI
Cisco ASA 5500 Series Command
Reference
Cisco ASA 5500 Series System Log
Messages
See...
Chapter 9, "Scenario: IPsec
Remote-Access VPN Configuration"
Chapter 11, "Scenario: SSL VPN
Clientless Connections"
Chapter 10, "Scenario: Configuring
Connections for a Cisco AnyConnect
VPN Client"
Cisco ASA 5500 Series Getting Started Guide
What to Do Next
12-13