Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual page 48

Installing the Chassis
Figure 4-4
Figure 4-2
Note
the chassis while
front of the chassis. You can attach the mounting brackets to the front or the rear
of the chassis so that you can have the front panel or the rear panel of the chassis
facing outward.
Figure 4-2
how that configuration appears while
the front so that you can see how that configuration appears. In
you will choose to have either the brackets rear mounted or front mounted but not
both.
To remove the chassis from the rack, remove the screws that attach the chassis to
the rack, and then remove the chassis.
Cisco ASA 5500 Series Getting Started Guide
4-6
Chapter 4
Rack-Mounting the Chassis
PO WE R
ST AT US
and Figure 4-3 show the rack mounting brackets attached to the rear of
Figure 4-4 shows the rack mounting brackets attached to the
and Figure 4-3 show the brackets attached to the rear so you can see
Installing the ASA 5500, ASA 5510, ASA 5520, and ASA 5540
CI SC O
AS A 55
Ad ap tiv 40
SE RIE
e Se cur S
AC TI VE ity Ap pli
VP N an ce
FL AS H
Figure 4-4 shows the brackets attached to
Step 1 and Step 2,
78-19186-01