Editing Map Definitions - Novell SENTINEL 6.1 SP2 - 02-2010 User Manual

Event Configuration
Figure 11-14
If an event contains a target IP of 10.0.1.14 (equivalent to numerical value of 167772430), the
output for column CustomerVar89 within the event will be BBB.
Sentinel supports the following number ranges:
Range from negative number to negative number (for example, "-234—34")

Range from negative number to positive number (for example, "-234-34")

Range from positive number to positive number (for example, "234-236")

Single number range (negative) (for example, "-234"). In this case, the min and the max will

both be -234.
Single number range (positive) (for example, "234"). In this case, the min and the max will

both be 234.
Range from negative number to max number (for example, "-234-"). In this case, the min will

be -234 and the max will be (2^63 - 1).
Range from positive number to max number (for example, "234-"). In this case, the min will be

234 and the max will be (2^63 - 1).
NOTE: In all cases, the min must be less than or equal to the max (for example, "-234- -235" is
NOT valid).

11.8.3 Editing Map Definitions

To edit a map definition:
1 Navigate to Admin tab and select Map Data Configuration from the navigation pane or click
Map Data Configuration button.
2 Expand the folder of interest.
3 Highlight a map definition and click Edit.
NOTE: The editing function is disabled for map definitions that are under the UNMANAGED
ITEMS folder.
Administration 257