3 Select the summary or summaries you want to query.
4 Select a time interval.
5 Click Show Event.
6 The Eventfiles needed to complete the summary displays in a list format.
NOTE: To complete summaries, see
To run Eventfiles for a summary:
1 Click Report Data Configuration in the navigation pane or click the Report Data Configuration
button.
2 Select Status.
3 Select the Summary or Summaries you want to query.
4 Select a time interval.
5 Click Show Event.
6 The Eventfiles needed to complete the summary displays in a list format.
7 Check the Eventfiles that you want to run so that the summary is complete.
270 Sentinel 6.1 User Guide
"To run Eventfiles for a summary:" on page
270.