Novell SENTINEL 6.1 SP2 - 02-2010 User Manual page 263

Device and Attack Signature corresponds to Asset Name
Figure 11-18
To Configure Event tags (columns) to use Mapping:
1 Navigate to Admin tab and click Event Configuration in the navigation pane or click Event
Configuration button.
2 Highlight an event tag entry from the Event Columns list.
NOTE: The original Event Tag name displays above the Label field. In addition, the
description of the event column is provided.
3 Click Referenced from Map to configure the event tag to be populated with data from a map.
Click External to keep whatever value the Collector put in the event tag (if any).
4 Click the Map Name field down arrow.
Select one of the available default maps or a map you have created.
5 Click the Map Column field down arrow and select a Map Column name. Depending on your
Map Name choice in the previous step, these values will vary.
Administration 263