Novell SENTINEL 6.1 SP2 - 02-2010 User Manual page 124

To edit a Command Step:
1 Right-click a Command Step and select Edit Step.
2 Provide a Name for this step.
3 Specify the path and name of the command or script to execute (relative to the $ESEC_HOME/
config/exec or %ESEC_HOME%\config\exec directory)
4 If you want to run a command or script referenced in a variable that gets populated during the
workflow process, check the Use Variables box.
5 Specify any command-line arguments to pass to the command or script. If you want to use the
contents of a variable that gets populated during the workflow process, check the Use Variables
box.
6 Specify a variable to hold output from the command or script. Any standard output is placed
into these variables.
7 Click Description tab to provide description for this step.
8 Click OK.
Deleting Steps
To delete a Step:
1 Click iTRAC tab.
2 In the Navigator, click iTRAC Administration > Template Manager.
3 Highlight an existing template, click View/Edit. iTRAC Process Builder window displays.
124 Sentinel 6.1 User Guide