Configuring the Action Plug-In
1 Log in to the Sentinel Control Center system as the administrator.
2 Select Tools > Action Manager.
3 In the Action Manager window, click Add.
The Configure Action window is displayed.
4 Specify the following:
Action Name: Specify a name for the action. For example, Sentinel Link.
Action: Select Sentinel Link 6.1r1 from the drop-down.
Integrator: Select Sentinel Link from the drop-down.
5 Click Save.
Filtering Events to Forward to the Receiver
To select events that you want to forward to a receiver system, you need some filtering mechanism.
Use Correlation Manager or Global Filters to filter the desired events for forwarding to the receiver
system.
NOTE: To forward events to another Sentinel or Sentinel Log Manager system based on simple
filtering conditions, use Sentinel Link with Global Filters.
Sentinel Link can also be used wherever a JavaScript* action can be executed in Sentinel such as
Correlation, Incidents, and Event right-click. However, while event forwarding, the same event is
likely to be forwarded more than once with these mechanisms. For example, using Correlation, you
Sentinel Link Solution 423