Novell SENTINEL 6.1 SP2 - 02-2010 User Manual page 210

Provide Name of the Event Source.

Check the Run checkbox if you want to run your Event Source automatically.

 Click Details button to see plugin details.
You can set alerts (with repeated option) if no data is received in a specified time interval.

You can limit the data rate as maximum number of records per second.

 You can check Trust Event Source Time to display the Device Time (time when the event
occurred) instead of Event Source Time (time when the event was reported to console).
 You can set filter through Set Filter button. In the Filter window, add/edit the filters and
click OK.
8 Click Next. The Summary window displays.
 Click Test Connection to test the event source. Test Event Source window displays with
Data and Error tabs. The Error tab displays the error message if there is any error in the
configuration of event source.
After a few seconds, a sampling of raw data should be received from the Event Source and

displayed in the Data tab.
Use the Start and Stop buttons to start or stop the test.

Use the "Maximum Rows" component to control the max number of raw data records to

obtain at once.
210 Sentinel 6.1 User Guide