Novell SENTINEL 6.1 SP2 - 02-2010 User Manual page 230

2 In the Admin Navigator, click Crystal Report Configuration.
For Crystal Reports Server running on Windows:
In the Analysis URL box, specify the URL for the Crystal Reports Server and click

Refresh.
http://<hostname_or_IP_of_web_server>/
GetReports.asp?APS=<hostname>&user=Guest&password=&tab=Analysis
NOTE: <hostname_or_IP_of_web_server> must be replaced with the IP address or
hostname of the Crystal Reports Server.
NOTE: The URL above will not work properly if the APS is set to the IP Address. It must
be the host name.
In the Advisor URL box, specify the URL for the Crystal Reports Server and click

Refresh.
http://<hostname_or_IP_of_web_server>/
GetReports.asp?APS=<hostname>&user=Guest&password=&tab=Advisor
NOTE: <hostname_or_IP_of_web_server> must be replaced with the IP address or
hostname of the Crystal Reports Server.
NOTE: The URL above does not work properly if the APS is set to the IP Address. It
must be the host name. For more information, see
Sentinel 6.1 Installation
For Crystal Reports Server running on Linux (SUSE and Red Hat):
In the Analysis URL box, specify the URL for the Crystal Reports Server and click

Refresh.
http://<hostname_or_IP_of_web_server>:<web_server_port_default_8080>/
esec-script/
GetReports.jsp?APS=<hostname>&user=Guest&password=&tab=Analysis
where
<hostname_or_IP_of_web_server> must be replaced with the IP address or
hostname of the Crystal Reports Server
<APShostname> must be a hostname, not an IP address
<web_server_port_default_8080> must be replaced with the port of the
Crystal Reports Server is listening on
In the Advisor URL box, specify the URL for the Crystal Reports Server and click

Refresh.
http://<hostname_or_IP_of_web_server>:<web_server_port_default_8080>/
esec-script/
GetReports.jsp?APS=<APShostname>&user=Guest&password=&tab=Advisor
where
<hostname_or_IP_of_web_server> must be replaced with the IP address or
hostname of the Crystal Reports Server
<APShostname> must be a hostname, not an IP address
<web_server_port_default_8080> must be replaced with the port of the
Crystal Reports Server is listening on.
230 Sentinel 6.1 User Guide
Guide.
"Crystal Reports for Windows" in