Novell SENTINEL 6.1 SP2 - 02-2010 User Manual page 282

2 Go to $ESEC_HOME/sdm
3 Provide the following command line:
./sdm
To start SDM GUI on Windows:
1 Click Start > All Programs (Win XP) or Program Files (Win2000) > Sentinel > Sentinel Data
Manager.
NOTE: To run the SDM from the command line, see the
page 289.
To connect to the Database:
1 Log into the machine with SDM installed.
NOTE: If the Sentinel Database Administrator account uses Windows Authentication, you
must log into the SDM machine using the Sentinel Database Administrator account.
2 Start the SDM GUI using the appropriate procedure (for Windows or UNIX).
3 Select the database type (Oracle or MSSQL).
4 Specify the Database instance name used during the Sentinel database installation.
5 Specify the Database Host (hostname or IP address).
6 Specify the port used for database communications.
7 If using SQL Server authentication, specify the Sentinel Database Administrator username and
password.
NOTE: If you select Windows Authentication, you will be authenticated to the MS SQL
database as the user you are currently logged into Windows as (that is, single sign-on).
For Oracle:
For Windows:
282 Sentinel 6.1 User Guide
Section 12.3, "SDM Command Line," on