Novell SENTINEL 6.1 SP2 - 02-2010 User Manual page 396

Link Event Source server to auto-create the nodes is much simpler and is preferred over manual
configuration because it ensures that nodes are properly configured and connected so that events are
routed to the Sentinel Link Collector.
1 In the Event Source Management view, right-click the Collector Manager, select Add Event
Source Server, then select Sentinel Link Connector and click Next.
The Networking window is displayed.
2 Specify the following, then click Next.
Options
Interface(s)
396 Sentinel 6.1 User Guide
Description
Specify any of the following:

All network interfaces: Binds the port on all the IP
addresses of the machine, including local loopback.

Internal loopback interface: Binds the port only to the
local loopback address.

Network interface with this IP: Allows the port to be
bound to one IP address on the machine with multiple
IP addresses.