Novell SENTINEL 6.1 SP2 - 02-2010 User Manual page 273

5b Specify the LDAP username based on the value you specified for
on LDAP directory" parameter while configuring LDAP authentication.
y: The User Name must be the same as the eDirectory username or Active Directory

sAMAccountName.
n: The User Name need not be the same as the eDirectory username or Active

Directory sAMAccountName.
5c Click the drop-down arrow on the Security Filter drop-down list.
The Filter Selection window is displayed that lists all the public filters.
5c1 Select a filter, and click Select or click Add to create a filter, then select the new filter.
After assigning a security filter to a user, you cannot delete that filter.
5d Specify the fully qualified Distinguished Name of the LDAP user in the LDAP USER DN
field. Do not leave the LDAP User DN field empty.
For example, cn=sentinel_ldap_user,o=novell
This field is available only if you have specified
directory" parameter while configuring LDAP authentication. For more information, see
"LDAP Authentication" in Sentinel 6.1 Installation Guide.
NOTE: If you had opted to perform anonymous searches when you had last run the
ldap_auth_config
Run the script
ldap_auth_config
on LDAP directory". For each existing LDAP user, right-click and select User Details and
specify the fully qualified DN of the LDAP user in the LDAP User DN field.
script, and now you do not want to perform anonymous searches:
script again, and specify n for
"Anonymous searches
for "Anonymous searches on LDAP
n
"Anonymous searches
Administration 273