Novell SENTINEL 6.1 SP2 - 02-2010 User Manual page 420

 Encrypted (HTTPS): Establish a secured connection. If you select the encrypted
(HTTPS) option, you are optionally allowed to specify a Server validation mode and an
Integrator key pair.
Field
Server Validation
Mode
Integrator Key Pair
13 Click Next. The Queue Settings window displays.
420 Sentinel 6.1 User Guide
Description
Select either of the following:

None- server certificate NOT validated: The Integrator does
not validate the receiver's certificate.

Strict - valid server certificate required: The Integrator
always verifies the receiver's certificate when connecting to the
receiver. If this option is selected, the Integrator immediately
attempt to retrieve the receiver's certificate over the network and
validate that it is issued by an authorized CA.
If the certificate is not validated for some reason, it is still
presented to the user to accept or reject. The certificate is
considered to be valid if the user accepts it. When a validated
certificate is acquired, it is stored in the Integrator's
configuration. Henceforth, the Integrator allows communication
only with a receiver that provides that certificate during the initial
connection setup.
Select either of the following:

None (server does not validate integrator certificate): The
receiver system does not validate the sender certificates. Select
this option if the receiver's client authentication type is
configured to Open.

Custom (server validates integrator certificate): The receiver
system validates the sender certificates. Select this option if the
receiver's client authentication type is configured to Strict. If the
receiver system performs a strict validation, it imports a trust
store, which contains all the sender certificates that it trusts.
After selecting this option, click the Import Key Pair button to
import a key pair. The key pair you import must match one of the
certificates that is included in the trust store, which is imported
by the receiver system.