Novell SENTINEL 6.1 SP2 - 02-2010 User Manual page 359

Event enrichment, including map definitions and event metatag configuration

Other associated files added when the Solution Pack is created, such as documentation,

example report PDFs, or sample map files.
The general steps for Sentinel content are described below. The steps for reports, which are Crystal
content, are slightly different. For more information, see
NOTE: Because dynamic list elements and map data are often highly dependent on the system
environment, this data is not included as part of the dynamic list or map definition in the Solution
Pack. However, this data can be attached to the Solution Pack as a
To add Sentinel content to a control:
1 Log into Solution Designer in connected mode.
2 Open or create a Solution Pack.
3 Click the appropriate panel to display the available Reports from the Content Palette-Solution
Pack, Category, Control, Control Group and Contents.
4 Select the specific Content Group you want to add.
5 Select the appropriate Control or placeholder and click Add Selected Content. Alternatively,
drag and drop the selected Content Group to the appropriate Control or placeholder in the
Solution Pack frame.
NOTE: If you try to add pre-existing content in Solution Designer by drag and drop, the existing
content is highlighted. After you drop the content, a message prompt displays stating existence of
similar content.
Crystal Reports Server
You can add a Crystal Report (
Server or from a local file system. Adding a Crystal report is similar to adding other types of
content, but it requires an extra step to log into the Crystal Reports Server.
Crystal reports must be deleted in the same way they were added. It is strongly recommended that
the Description be edited to indicate whether the report was added to the local file system or to the
Crystal Reports Server.
To add a report from a Crystal Reports Server:
1 Log into Solution Designer in connected mode or offline mode and open or create a Solution
Pack.
2 Click Report panel in the Content Palette. The Report Panel will expand.
file) from the SentinelReports folder on a Crystal Reports
.rpt
"Crystal Reports Server" on page
file.
.csv
359.
Solution Packs 359