Rebooting Ultrakey Touch; Changing The Ultrakey Touch Password; Figure 5-1 Software Upgrade Warning Message - Honeywell UltraKey Touch HJC4000 Installation And User Manual

System Administration and Troubleshooting

Rebooting UltraKey Touch

Changing the UltraKey Touch Password

68
The Upgrade Status window opens. Messages display to indicate when old files are
being erased and new files are being copied.
When the process is complete, the message Upgrade success displays and the system
reboots.
Figure 5-1 Software Upgrade Warning Message
1. Log into the web browser.
2. From the top menu, click the System Reboot tab.
The Reboot System window opens.
3. Click Reboot to continue, click another tab, or click Logout to exit without rebooting.
1. Log into the web browser.
2. In the upper right corner, click Change Password (see
3. In the Old Password field, enter the current password.
4. In the New Password field, enter a new password.
5. Enter the new password in the Confirm New Password field.
6. Click Apply to set the new password or Cancel to exit without changing it.
Figure 5-2).