Table 3-5 Serial Port Com1 (Rs485) Configurations - Honeywell UltraKey Touch HJC4000 Installation And User Manual

Connecting UltraKey Touch to a DVR
34
Table 3-5 Serial Port Com1 (RS485) Configurations
Type
Baud Rate
Parity
DataBit
StopBit
3. Press Alt > Clr a second time to enter the System Configuration menu.
4. Rotate the slider to scroll through the options (standalone settings, serial port,
network, language, slider update, cascade linkage, hardware test, about, and restore
default).
5. When you are at the System Configuration: Serial
Port menu, press Ent to enter.
6. Press the Slider_Up/Down or LCD up/down arrow
keys to select Com1 (RS485). Press Ent or
Slider_Right to confirm, and Slider_Left to return.
7. The Serial Setting menu displays. Here you can set the Com1 (RS485) settings for
parity, baud rate, data bit and stop bit:
a. Press the Slider_Right to select Parity. Press Ent
and use the Slider_Up/Down or the LCD up/down
arrow keys to select none. Press Ent to save.
b. Press the Slider_Down or the LCD up/down arrow
keys to select Baud Rate. Press Ent and use the
up/down arrow keys to select 1200, 1800, 2400,
4800, 9600, 19200, 38400, or 57600. Press Ent to
save.
c. Press the Slider_Up/Down or the LCD up/down
arrow keys to select Data Bit. Press Ent and use
the Slider_Up/Down or the LCD up/down arrow
keys to select 7 bit or 8 bit. Press Ent to save.
d. Press the down arrow key to select Stop Bit.
Press Ent and use the Slider_Up/Down or the
LCD up/down arrow keys to select 1 bit or 2 bit.
Press Ent to save.
8. Press Slider_Left to return to the main menu.
RS485
9600
None
8
1
System Configuration
Serial Port
Serial Port:
Com1(RS485)
Serial Settings:
Parity
Serial Settings:
Baud Rate
Serial Settings:
Data Bit
Serial Settings:
Stop Bit