System Administration and Troubleshooting
Restore Default
Updating the Touch Pad Firmware
Viewing the Firmware Version
Testing the Hardware
66
1.
Log into the controller.
2.
From the System Configuration menu, press
Slider_Up/Down to scroll to Restore default.
3.
Press Ent to confirm whether or not to restore to
factory defaults.
1.
Log into the controller.
2.
From the System Configuration menu, press
Slider_Up/Down to scroll to Slider Update. Press Ent.
The message Update Confirm? displays.
3.
Press the LCD up arrow key to select Yes or No.
•
Select Yes and press Ent to upgrade the firmware.
•
Select No and press Ent to cancel.
If you select Yes, the message Slider Firmware:
Download displays, followed by Download: OK.
4.
Press Ent to exit the menu.
1.
Log into the controller.
2.
From the System Configuration menu, press
Slider_Up/Down to scroll to About. Press Ent.The
LCD scrolls to display the firmware version.
3.
Press any key to return to the previous menu.
1.
Log into the controller.
2.
From the System Configuration menu, press
Slider_Up/Down to scroll to Hardware Test. Press
Ent.
System Configuration
Restore default
System Configuration
Slider Update
Update confirm?
Yes
Slider Firmware:
Download:
ok
System Configuration
About
System Configuration
Hardware
test