Appendix Advr Operation Commands; Fusion Operation Commands - Honeywell UltraKey Touch HJC4000 Installation And User Manual

DVR Operation Commands

Fusion Operation Commands

Keys...
Number keys
Seq
Alarm
Recycle
Camera
Live/Search
Reverse
Stop
Play
Zoom
Document 800-06554 Rev C
02/11
Table A-1 Fusion DVR Operations
Function...
Press a number key + DVR, or DVR + number + Ent to select a DVR to control.
Press 4+1 + Split to display in 4A grid
Press 4+2 + Split to display in 4B grid
Press 4+3 + Split to display in 4C grid
Press 4+4 + Split to display in 4D grid
Press 9+1 + Split to display in 9A grid
Press 9+2 + Split to display in 9B grid
Press 1+6 + Split to display in 16 grid
Press to toggle Auto Sequence on Fusion DVR.
Press the number key (less than 5 ) followed by Alarm to toggle Relay (Alarm output) on
specified channel.
Press the number key which presents for the specified channel, then Recycle to toggle
Instant Record on specified channel.
Press the number key + Camera, or Camera + number + Ent to show the specified
camera.
Toggles Fusion Live/Search Display.
In PTZ mode, Live/Search can be used to enter FOCUS mode.
Press to play recorded videos in reverse in Search mode.
Stops video playback.
Play video forwards in Search mode.
If only one camera is selected in search, press Set to adjust the zoom level from level 1
to level 5.
A
71