Controlling A Fusion Dvr; Step 1: Connection; Step 2: Select Dvr Type; Figure 3-10 Ip Configuration Tab - Honeywell UltraKey Touch HJC4000 Installation And User Manual

Side menu

Controlling a FUSION DVR

Step 1: Connection

Step 2: Select DVR Type

Document 800-06554 Rev C
02/11
Figure 3-10 IP Configuration Tab
See Figure 3-3 on page 28, and
1. Press Alt + Clr to enter the Standalone Settings menu. See the menu tree (see
Figure 3-2 on page 26) to select the DVR.
2. Press the Slider_Right and rotate the slider in the DVR
TYPE menu. The following LCD screens are displayed.
3. Press the Slider_Right to select FUSION.
UltraKey Touch Installation and User Guide
Figure 3-4 on page 32.
Standalone Set:
DVR
DVR Selection:
FUSION
43