Using The Ultrakey Touch Controller; Logging Onto The Controller; Using The Ultrakey Touch To Navigate The Lcd Menus - Honeywell UltraKey Touch HJC4000 Installation And User Manual

Using the UltraKey Touch Controller

Logging Onto the Controller

Using the UltraKey Touch to Navigate the LCD Menus

Document 800-06554 Rev C
02/11
You may need to learn how to use the UltraKey Touch both before and after you begin
configuring. This section covers:
• Logging Onto the Controller
• Using the UltraKey Touch to Navigate the LCD Menus
1. Connect the keyboard with a power adapter (12V [±10%] DC/1 A included).
2. Press Login on the keyboard.
3. Enter the password, 1234.
4. Press Alt>Clr to configure the main menu settings.
Note If an invalid password is entered, a message displays and the controller
buzzes. Repeat the steps to log in.
There are a variety of ways to navigate the LCD menus during configuration as well as
normal operation. See Figure 2-2
See Table 2-2 for specific methods of navigating the LCD during installation and set up.
on page 21
on page
for a brief overview of the three main navigation options.
2
21
21