Table of Contents
Advertisement
Configuring UltraKey Touch Using the Web Browser
(Optional)
Logging into the Web Browser
Step 1: Configure UltraKey Touch to Standalone Mode
Document 800-06554 Rev C
02/11
1.
Input, navigate to, or copy and paste, the applicable IP address into your web
browser:
•
LAN connections: for example, http://192.168.1.9 (default).
•
Crossover cable connections - static address: http://192.168.1.9 (default).
2.
Enter Administrator (case sensitive) in the User Name field.
3.
Enter 1234 (default) in the Password field.
4.
Click Login.
Figure 3-6
UltraKey Touch Login Page
1.
Log into the web browser (see
2.
From the top menu, click the Configuration tab (see
3.
From the side menu, click the System Configurations tab.
4.
Select Standalone from the System Mode drop-down list.
5.
Select English from the System Language drop-down list.
6.
Click Apply to save the configuration, Cancel to exit without saving, or Default to
restore all factory default values.
UltraKey Touch Installation and User Guide
Logging into the Web Browser
Figure
on page 39).
3-7).
39
- Quick Links:
- Logging Onto the Controller
Hide quick links:
Advertisement
Table of Contents
