HEIDENHAIN ITNC 530 - 6-2010 DIN-ISO PROGRAMMING User Manual page 582

TNC displays, TNC editor
Locking soft key for
tables
Configure pallet files
Configure datum files
Program length up to
which the LBL
numbers are checked
Program length up to
which FK blocks are
checked
Dialog language
582
MP7224.2
Do not lock the EDITING ON/OFF soft key: %0000000
Lock the EDITING ON/OFF soft key for
Without function: Bit 0 = 1
Without function: Bit 1 = 1
Tool tables: Bit 2 = 1
Datum tables: Bit 3 = 1
Pallet tables: Bit 4 = 1
Without function: Bit 5 = 1
Point tables: Bit 6 = 1
MP7226.0
Pallet table inactive: 0
Number of pallets per pallet table: 1 to 255
MP7226.1
Datum table inactive: 0
Number of datums per datum table: 1 to 255
MP7229.0
Blocks 100 to 9999
MP7229.1
Blocks 100 to 9999
MP7230.0 to MP7230.3
English: 0
German: 1
Czech: 2
French: 3
Italian: 4
Spanish: 5
Portuguese: 6
Swedish: 7
Danish: 8
Finnish: 9
Dutch: 10
Polish: 11
Hungarian: 12
Reserved: 13
Russian (Cyrillic character set): 14 (only on the MC 422 B)
Chinese (simplified): 15 (only on the MC 422 B)
Chinese (traditional): 16 (only on the MC 422 B)
Slovenian: 17 (only as of MC 422 B, software option)
Norwegian: 18 (only as of MC 422 B, software option)
Slovak: 19 (only as of MC 422 B, software option)
Latvian: 20 (only as of MC 422 B, software option)
Korean: 21 (only as of MC 422 B, software option)
Estonian: 22 (only as of MC 422 B, software option)
Turkish: 23 (only as of MC 422 B, software option)
Romanian: 24 (only as of MC 422 B, software option)
Lithuanian: 25 (only as of MC 422 B, software option)
Tables and Overviews