Monitoring Vpn Firewall Statistics - NETGEAR FVS318G-100NAS Reference Manual

Table 6-3. Router Status Fields (continued)
Item Description
LAN Port Displays the current settings for MAC address, IP address, DHCP status and IP
subnet mask that you set in the LAN IP Setup screen. DHCP can be either Enabled
or Disabled.
Broadband • WAN Mode: Single Port is the only possible option.
Configuration • WAN State: UP or DOWN.
• NAT: Enabled or Disabled.
• Connection Type: Static IP, DHCP, PPPoE, or PPTP.
• Connection State: Connected or Disconnected.
• IP Address.: The IP address of the WAN interface.
• Subnet Mask: The IP subnet mask of the WAN interface.
• Gateway: The gateway IP address for the WAN interface.
• Primary DNS: The IP address of the primary DNS server for the WAN interface.
• Secondary DNS: The IP address of the secondary DNS server for the WAN
• MAC Address: The MAC address of the WAN interface.

Monitoring VPN Firewall Statistics

To display the VPN firewall statistics:
1. Select Monitoring from the main menu and Router Status from the submenu. The Router
Status screen displays (see
2. Click the Show Statistics option arrow in the upper right-hand section of the screen. The
Router Statistics screen displays.
Figure 6-15
VPN Firewall and Network Management
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
interface.
Figure 6-14 on page
v1.1, August 2010
6-30).
6-31