Memory Bank Scan - Yaesu VX-3R Operating Manual

quency pair. See next chapter for details.
5. Release the [ BAND ] key to initiate Preferential Memory Scanning. Only the channels
that have a blinking " " icon appended to the channel number will be scanned.
M B S
EMORY ANK
When the Memory Bank feature is engaged, the scanner sweeps only memory channels in
the current Memory Bank. However, if the Memory Bank Link Scan feature is enabled,
you may sweep the memory channels in several Memory Banks which you have selected.
To enable the Memory Bank Link Scan feature:
1. Set the radio to the Memory mode by pressing the [ V/M ] key, if necessary.
2. Press the [ BAND ] key to activate the "Memory Bank" mode.
The " " icon and Memory Bank number will appear on the
display.
3. Press the [ F/W ] key, followed by the [ BAND ] key.
4. Rotate the DIAL knob to select the first Memory Bank ("BANK
1 1 1 1 1 " ~ "BANK24 BANK24") you wish to sweep using Memory Bank Link
BANK24 BANK24
BANK24
Scan.
5. Press the [ V/M ] key momentarily. A small blinking " " icon will
appear at the above of the volume level indicator, indicating this
Memory Bank will now be swept during Memory Bank Scan.
6. Repeat steps 4 and 5 above, to append the blinking " " icon to
any other Memory Banks you wish to sweep.
7. Press the [ BAND ] key.
8. Now, press and hold in the [ BAND ] key for one second to ini-
tiate the Memory Bank Link Scan.
9. To remove a Memory Bank from the Memory Bank Link Scan,
repeat steps 1 - 5 above, to delete the blinking " " icon from the
Memory Bank number indication.
VX-3R O
PERATING
M
EMORY
CAN
M
ANUAL
S
CANNING
BANK BANK BANK
BANK
S
CANNING
61