Yaesu VX-3R Operating Manual page 110

( M
S
ET ENU
Set Mode Item 1 [ ANT AM ]
Function: Select the antenna to be used in the AM Broadcast listening.
Available Values: BAREXT/BARANT
Default: BAREXT
BAREXT: Uses both the internal Bar Antenna and the Rubber Flex Antenna.
BARANT: Uses the internal Bar Antenna only.
The Bar Antenna is directional; rotate the VX-3R for best reception.
Set Mode Item 2 [ ANT FM ]
Function: Select the antenna to be used in the FM Broadcast listening.
Available Values: EXTANT/EARPHO
Default: EXTANT
EXTANT: Uses the Rubber Flex Antenna.
EARPHO: Uses the Earphone Antenna. When receiving a weak signal, reception may be
noisy.
Set Mode Item 3 [ ANT.ATT ]
Function: Enables/Disables the receiver Front-end Attenuator.
Available Values: ON/OFF
Default: OFF
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 4 [ APO ]
Function: Setting of the Automatic Power-Off feature.
Available Values: OFF/0.5H - 12.0H (0.5H/steps)
Default: OFF
Set Mode Item 5 [ ARS ]
Function: Enables/Disables the Automatic Repeater Shift function.
Available Values: ON/OFF
Default: ON
Set Mode Item 6 [ ARTSBP ]
Function: Selects the Beep option during ARTS™ operation.
Available Values: OFF/IN RNG/ALWAYS
Default: IN RNG
OFF: No alert beeps sound.
IN RNG: Beeps sound only when the radio first detects that you are within range.
ALWAYS: Beeps sound every time a polling transmission is received from the other sta-
tion (every 15 or 25 seconds when in range).
108
) M
ODE
VX-3R O
PERATING
M
ANUAL