Yaesu VX-3R Operating Manual page 112

( M ) M
S
ET ENU ODE
Set Mode Item 15 [ BP USR ]
Function: Create the beep melody for Bell ringer function.
See page 38 for details.
Set Mode Item 16 [ BSY.LED ]
Function: Enables/Disables the BUSY LED while the Squelch is open.
Available Values: ON/OFF
Default: ON
Set Mode Item 17 [ CH CNT ]
Function: Selects the Channel Counter Search Width.
Available Values: ±5 MHz/±10 MHz/±50 MHz/±100 MHz
Default: ±5 MHz
Set Mode Item 18 [ CLK.SFT ]
Function: Shifting of the CPU clock frequency.
Available Values: ON/OFF
Default: OFF
Note: 1) This Set Mode Item can select and set the function to each memory channel
individually.
2) This function is only used to move a spurious response "birdie," should it fall on a
desired frequency.
Set Mode Item 19 [ CW ID ]
Function: Programs and activates the CW Identifier (used during ARTS operation).
See page 81 for details.
Set Mode Item 20 [ CWLRNG ]
Function: Enables/Disables the CW Learning feature.
See page 88 for details.
Set Mode Item 21 [ CWPICT ]
Function: Select the CW tone pitch for the CW Learn, CW training, and CW Identifier
functions.
Available Values: 400 - 1000 Hz (50 Hz/step)
Default: 700 Hz
Set Mode Item 22 [ CWTRNG ]
Function: Enables/Disables the CW Training feature.
See page 90 for details.
Set Mode Item 23 [ DC VLT ]
Function: Indicates the DC Supply Voltage.
110 VX-3R O M
PERATING ANUAL