Yaesu VX-3R Operating Manual page 57

To set the Scan-Restart Delay Time:
1. Press and hold in the [ TXPO ] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 76: SCN.STR
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ TXPO ] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select the desired Scan-Restart Delay
Time. Available selections are 100
and 1 1 1 1 1 - 10 SEC 10 SEC (0.5 SEC/step).
10 SEC 10 SEC
10 SEC
5. When you have made your selection, press the PTT switch to save the new setting and
exit to normal operation.
The default condition for this Set Mode Item is "2 SEC."
VX-3R O
PERATING
100 - 900 MS
100 100
100
M
ANUAL
SCN.STR SCN.STR
SCN.STR SCN.STR.
900 MS (100 MS/step)
900 MS 900 MS
900 MS
S
CANNING
55