Yaesu VX-3R Operating Manual page 113

Set Mode Item 24 [ DCS CD ]
Function: Setting of the DCS code.
Available Values: 104 standard DCS codes
Default: DCS.023
Note: This Set Mode Item can select and set
the function to each memory channel individu-
ally.
Set Mode Item 25 [ DCS RV ]
Function: Enables/Disables the "Inverted"
DCS Tone.
Available Values: R-N.T-N/R-I.T-N/R-B.T-N/
R-N.T.I/R-I.T-I/R-B.T-I
Default: R-N.T-N
R-N.T-N: Receive and transmit the Normal DCS Tone.
R-I.T-N: Receive the Inverted DCS Tone and transmit the Normal DCS Tone.
R-B.T-N: Receive the both Normal and Inverted DCS Tones and transmit the Normal DCS
Tone.
R-N.T.I: Receive the Normal DCS Tone and transmit the Inverted DCS Tone.
R-I.T-I: Receive and transmit the Inverted DCS Tone.
R-B.T-I: Receive the both Normal and Inverted DCS Tones and transmit the Inverted
DCS Tone.
Note: This Set Mode Item can select and set the function to each memory channel indi-
vidually.
Set Mode Item 26 [ DT A/M ]
Function: Enables/Disables the DTMF Autodial feature.
Available Values: MANUAL/AUTO
Default: MANUAL
Set Mode Item 27 [ DT DLY ]
Function: Selects the DTMF Autodialer Delay Time.
Available Values: 50MS/250MS/450MS/750MS/1000MS
Default: 450MS
Set Mode Item 28 [ DT SEL ]
Function: Programming of the DTMF Autodialer.
See page 85 for details.
Set Mode Item 29 [ DT SPD ]
Function: Selects the DTMF Autodialer Sending Speed.
Available Values: 50MS/100MS
Default: 50MS
VX-3R O
PERATING
M
ANUAL
( M
S
ET
DCS CODE
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754 –
) M
ENU ODE
– – – – –
111