Yaesu VX-3R Operating Manual page 106

( M
S
ET ENU
S M I F
ET ODE TEM UNCTION
1 [ ANT AM ]
Select the antenna to be used in the AM Broadcast listening.
2 [ ANT FM ]
Select the antenna to be used in the FM Broadcast listening.
3 [ ANT.ATT ]
Enables/Disables the receiver Front-end Attenuator.
4 [ APO ]
Setting of the Automatic Power-Off feature.
5 [ ARS ]
Enables/Disables the Automatic Repeater Shift function.
6 [ ARTSBP ]
Selects the Beep option during ARTS operation.
7 [ ARTSIT ]
Selects the Polling Interval during ARTS operation.
8 [ BCLO ]
Enables/Disables the Busy Channel Lock-Out feature.
9 [ BEL.RNG ]
Selects the number of Bell ringer repetitions.
10 [ BEL.SEL ]
Enables/Disables the Bell ringer function and its sound selec-
tion.
11 [ BNK.NAM ]
Stores Alpha-Numeric "Tags" for the Memory Banks.
12 [ BP EDG ]
Enables/Disables the Band-edge beeper while selecting the
frequency by the DIAL knob.
13 [ BP LVL ]
Adjust the Beep volume level.
14 [ BP SEL ]
Enables/Disables the Keypad beeper.
15 [ BP USR ]
Create the beep melody for Bell ringer function.
16 [ BSY.LED ]
Enables/Disables the BUSY LED while the Squelch is open.
17 [ CH CNT ]
Selects the Channel Counter Search Width.
18 [ CLK.SFT ]
Shifting of the CPU clock frequency.
19 [ CW ID ]
Programs and activates the CW Identifier (used during ARTS
operation).
20 [ CWLRNG ]
Enables/Disables the CW Learning feature.
21 [ CWPICT ]
Select the CW tone pitch for the CW Learn, CW training, and
CW Identifier functions.
22 [ CWTRNG ]
Enables/Disables the CW Training feature.
23 [ DC VLT ]
Indicates the DC Supply Voltage.
24 [ DCS CD ]
Setting of the DCS code.
25 [ DCS RV ]
Enables/Disables the "Inverted" DCS Tone.
26 [ DT A/M ]
Enables/Disables the DTMF Autodial feature.
27 [ DT DLY ]
Selects the DTMF Autodialer Delay Time.
28 [ DT SEL ]
Programming of the DTMF Autodialer.
29 [ DT SPD ]
Selects the DTMF Autodialer Sending Speed.
30 [ EAI ]
Enables/Disables the Emergency Automatic ID (EAI) feature.
31 [ EAI.TMR ]
Sets the Emergency Automatic ID (EAI) operating mode and
its Transmit Time.
32 [ EMG.SEL ]
Select the alarms utilized when the Emergency function is
engaged.
33 [ EXT.MNU ]
Enables/Disables the extended Set Mode Menu.
34 [ FW KEY ] Set the duration that a secondary function of the [ F/W ] key
(press and holding the [ F/W ] key) is held determines the func-
tion they activate.
35 [ HLF.DEV ]
Reduce the Deviation level by 50 %.
36 [ HM/RV ] Selects the function of the [ HM/RV ] key.
37 [ HM>VFO ]
Enables/Disables the function of the VFO DIAL knob, while in
the Home Channel mode.
38 [ INT CD ]
Selects the Access Number (DTMF digit) for the SRG opera-
tion of the Internet Connection feature (WIRES
39 [ INT MD ]
Selects the operating mode of the Internet Connection feature
(WIRES
40 [ INT.A/M ]
Enables/Disables the DTMF Autodialer, while operating the
Internet Connection feature (WIRES
41 [ INT.SEL ]
Programming of the Access Number (DTMF code) for the FRG
station of the WIRES
tem) access.
42 [ INTKEY ] Selects the function of the [ ] key.
43 [ INTNET ]
Enables/Disables the Internet Connection feature (WIRES
44 [ LAMP ]
Selects the LCD/Keypad Lamp mode.
45 [ LED LT ]
Illuminates the TX/BUSY indicator. It will glow continuously
white (useful as emergency flashlight at night).
46 [ LOCK ]
Selects the Control Locking lockout combination.
47 [ M/T-CL ]
Selects the function of the MONI key.
48 [ MCGAIN ]
Adjust the microphone gain level.
49 [ MR DSP ]
Toggles the display indication between "frequency" and "Al-
pha/Numeric" channel tags.
50 [ MR WMD ]
Determines the method of selecting channels for Memory Stor-
age.
104
) M
ODE
).
TM
(or non WIRES
TM
A
BAREXT / BARANT
EXTANT / EARPHO
ON / OFF
OFF / 0.5H - 12.0H (0.5H/steps)
ON / OFF
OFF / IN RNG / ALWAYS
15SEC / 25SEC
ON / OFF
1T - 20T / CONT (Continuous ringing)
OFF / BELL /
USRBP1 / USRBP2 /USRBP3
---
ON / OFF
LVL 1 - LVL 9 (LVL 5)
OFF / KY+SCN / KEY
---
ON / OFF
±5 MHz / ±10 MHz / ±50 MHz / ±100 MHz
ON / OFF
---
---
400 - 1000 Hz (50 Hz/step)
(700 Hz)
---
---
104 standard DCS codes (023)
R-N.T-N / R-I.T-N / R-B.T-N / R-N.T.I /
R-I.T-I / R-B.T-I
MANUAL / AUTO
50MS / 250MS / 450MS / 750MS / 1000MS
---
50MS / 100MS
ON / OFF
INT. 1M through INT.10M, INT.15M,
INT.20M, INT.30M, INT.40M, INT. 50M,
CON. 1M through CON.10M, CON.15M,
CON.20M, CON.30M, CON.40M, and
CON. 50M (CON. 5M)
BEEP / STROBE / BP+STR / BEAM /
BP+BEM / CW / BP+CW / CWT
ON / OFF
FW0.3S / FW0.5S / FW0.7S / FW1.0S /
FW1.5S
ON / OFF
HOME / REV
DISABL / ENABLE
DTMF 0 - DTMF F (DTMF 1)
).
TM
SRG / FRG
MANUAL / AUTO
).
TM
---
Internet Link Sys-
TM
INTNET / INT MR / SET MD
TM ). ON / OFF
KEY 2S - KEY10S / CONT / OFF (KEY 5S)
---
KEY / PTT / KY (KEY)+PTT
MONI / T-CALL
LVL 1 - LVL 9 (LVL 5)
ALPHA / FREQ
NEXT / LOWER
VX-3R O
( D
V : B
VAILABLE ALUES EFAULT
PERATING
)
I
OLD TARIC
M
ANUAL