Memory Bank Link Scan - Yaesu FT1DR Operating Manual

Memory Bank Link Scan

During regular memory bank scanning, only the
memory channels assigned to the recalled memory
bank are scanned. During memory bank link
scanning, memory channels registered in two or more
previously specified banks can be scanned.
Press the V key.
1
The Memory mode is selected.
Press the B key briefly.
2
Recall a memory bank.
Press the F key briefly, and then press the B key briefly.
3
Turn the O knob to select a memory bank.
4
Select a memory bank subject to bank link scanning.
Press the V key briefly.
5
Select the bank link.
The memory bank number changes from "B" to "b",
indicating that the bank link has been activated
6
Repeat steps 2-4 to select another memory bank.
Hints For the scanning range to be specified, see the table on page
66.
Press the B key briefly.
7
The memory banks subject to memory bank scanning are determined.
While pressing the B key, specify a scanning range.
8
Hints For the scanning range to be specified, see the table on page 66.
Release the B key.
9
Scanning (SCAN) is performed toward higher memory channel numbers.
• Turn the O knob clockwise.:
Hints
Scanning is performed toward higher memory channel numbers.
Turn the O knob counterclockwise.:
Scanning is performed toward lower memory channel numbers.
• When a signal is received during scanning, scanning stops for 5 seconds and this frequency
is received.
• When scanning is suspended, the decimal point blinks and the LCD stays lit.
• After receiving the frequency for 5 seconds, scanning resumes.
• To cancel scanning, press the p switch.
O Canceling Bank Link Scanning
Press the F key briefly, and then press the B key briefly.
1
2
Recall the link for which bank link scanning was specified.
Press the V key briefly.
3
The memory bank number changes from "b" to "B", indicating that the bank link has
been deactivated.
FCC ID: K6620445X20
IC: 511B-20445X20
Using the Scanning Function
BANK 1
BANK 24
The memory bank number
change from "B" to "b".
YAESU MUSEN
BANK 10
55
CO., LTD.