Connecting An Rps Dc Power Cord - H3C S5800-32F Installation Manual

Figure 3-23 Connect an AC power cord to the S5800-56C-PWR/S5800-32C-PWR II
Figure 3-24 Connect an AC power cord to the S5800-56C/S5800-32C I
Figure 3-25 Connect an AC power cord to the S5800-56C/S5800-32C II

Connecting an RPS DC Power Cord

Connecting a –54 VDC RPS power cord
The S5800-56C-PWR and S5800-32C-PWR support –54 VDC RPS power supply. Follow these steps
to connect the power cord:
Step1 Keep the upside of the –54 VDC RPS plug on top and plug it in the RPS DC receptacle (see callout 1 in
Figure 3-26). (If you plug it upside down, the insertion is not smooth because of the specific structure
design of the RPS DC receptacle and the RPS plug.)
Step2 Use a flat-blade screwdriver to fix the two screws on the RPS plug clockwise to secure the plug to the
RPS DC receptacle (see callout 2 in
Step3 Connect the other end of the RPS DC power cord to the external RPS power supply system.
Figure 3-26).
3-16