S5800-32F; Front Panel - H3C S5800-32F Installation Manual

S5800-32F

Front Panel

Figure 1-13 S5800-32F front panel
(1) Interface card 1
(3) 10/100/1000Base-X SFP interface status
LED
(5) Port mode LED
(7) Logo panel (A console port and a USB
interface are under this logo panel)
(9) Hot swappable power module 1 status LED
(PWR1)
(11) SFP+ interface
To use the console port and USB interface, open the logo panel, as shown in
The S5800-32F provides one interface card slots on its front panel. The slot is installed with a filler
panel when the switch is shipped. The above figure illustrates a switch with one LSW1SP4P0
interface card.
You can select an interface card for your switch as needed. See
the interface card models supported by the S5800 series, and see
page 3-24 for the installation of interface modules. See H3C S5820X & S5800 Series Ethernet
Switches Interface Cards User Manual for the detailed description of the interface modules.
(2) 100/1000Base-X SFP interface
(4) Seven-segment LED
(6) SFP+ interface status LED
(8) System status LED (SYS)
(10) Hot swappable power module 2 status LED
(PWR2)
(12) Port status LED mode switching button
1-11
Figure 1-4 and Figure
Interface Cards on page
Installing an Interface Card
1-5.
1-26 for
on