Loading Software Through The Boot Rom Menu; Introduction To The Boot Rom Menu - H3C S5800-32F Installation Manual

Each S5800-32F series switch provides a management Ethernet port, which can operate
regardless of the working status of the switching chip. To upgrade the Boot ROM program or load
application files when the switching chip fails to operate normally, you are recommended to use the
management Ethernet port.
Loading the Boot ROM or application files through the management Ethernet port is similar to that
through the common Ethernet port. This manual takes the common Ethernet port as examples in
file loading.

Loading Software Through the Boot ROM Menu

To load the Boot ROM and application files through the Boot ROM menu, you need to correctly connect
a user terminal to the switch using a console cable.

Introduction to the Boot ROM Menu

Starting......
************************************************************************
*
*
*
************************************************************************
Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.
Creation Date
CPU Clock Speed : 750MHz
Memory Size
Flash Size
CPLD Version
PCB Version
Mac Address
Press Ctrl-B to enter Extended Boot menu...4
When the system displays "Press Ctrl-B to enter Extended Boot menu", press Ctrl + B. Then, the
following prompt is displayed:
Please input BootRom password:
H3C S5800-56C BOOTROM, Version 007
: Dec 2 2008,17:43:47
: 512MB
: 512MB
: 001
: Ver.B
: 000ef2005800
5-2
*
*
*