Step5 Click Properties in the HyperTerminal window to enter the Switch Properties dialog box. Click the
Settings tab, set the emulation to VT100, and then click OK.
Figure 4-7 Set terminal emulation in Switch Properties dialog box
Booting the Switch
Checking Before Power-On
Before powering on the switch, verify that:
The power cable is properly connected.
The power supply voltage meets the requirement of the switch.
The console cable is properly connected; the terminal or PC used for configuration has been
started; and the configuration parameters have been set.
Powering On the Switch
The S5800 series have the same Boot ROM display style. This document uses the Boot ROM output
information on the S5800-56C as an example:
Starting......
************************************************************************
*
*
*
************************************************************************
Copyright (c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.
Creation Date
CPU Clock Speed : 750MHz
H3C S5800-56C BOOTROM, Version 007
: Dec
2 2008,17:43:47
4-5
*
*
*