Rear Panel - H3C S5800-32F Installation Manual

Rear Panel

Figure 1-2 S5800-60C-PWR rear panel
(1) OAP card filler panel
(3) Grounding screw
(5) Hot swappable power module 1
(7) Hot swappable fan tray
The S5800-60C-PWR provides two power module slots on its rear panel. Hot swappable power
module slot 1 is empty when the switch is shipped, and hot swappable power module 2 is installed
with a filler panel. The above figure illustrates a switch with two PSR300-12A AC power modules.
You can select one or two power modules for your switch as needed. See
Modules on page
Installing a Power Module
PSR300-12A & PSR300-12D1 Power Modules User Manual and H3C PSR750-A & PSR750-D
Power Modules User Manual for the detailed description of the power modules.
The S5800-60C-PWR provides a PoE module slot on its real panel. The slot is installed with a filler
panel when the switch is shipped. You can install a PoE module on your switch as needed.
The S5800-60C-PWR provides an OAP card slot on its rear panel. The slot is installed with a filler
panel when the switch is shipped. You can install an OAP card (firewall card, IPS card or access
controller module) on your switch as needed. For supported OAP card models, refer to
on page 1-27; for how to install an OAP card, refer to
1-23 for the power module models supported by the S5800-60C-PWR, and see
on page 3-12
(2) PoE module
(4) Filler modules
(6) Hot swappable power module 2
for the installation of power modules. See H3C
Installing an OAP Card
1-5
Hot Swappable Power
OAP Card
on page 3-26.