Port Mode Led; Seven-Segment Led - H3C S5800-32F Installation Manual

Port Mode LED

The port mode LED on the S5800 series can display the working status of a port for you to obtain more
device information. You can use the port mode switching button to change the status of the port mode
LED.
Table 1-12 Port mode LED description
LED
Mode

Seven-Segment LED

The seven-segment LED and the system status LED together indicate the operating status of the
device. For details, refer to
Table 1-13 Seven-segment LED description (1)
System
LED
status
LED
(SYS)
Flashing
green
Flashing
red
Flashing
green
Unit
Steady
red
Steady
red
Steady
green
Status
Steady green
Flashing green (1 Hz) (supported
by PoE switches only)
Steady yellow
Table 1-13.
Status
Seven-segment LED
The LED displays the specific numbers one by
one.
The LED flashes the specific numbers.
A bar rotates clockwise around the LED.
The LED flashes and displays F.
The LED flashes and displays t.
The LED displays C.
The LED displays S.
Indicates port rate.
Indicates port PoE power supply.
Indicates port duplex mode.
1-19
Description
Description
POST running. The LED
displays the POST test ID.
POST failed. The LED
flashes the POST test ID of
the failed test.
Software loading
Fan failure
Over-temperature alarm
The current switch is the
command switch in the
cluster.
The current switch is a
member switch in the cluster.