Hot Swappable Power Module Status Leds; Rps Status Led - H3C S5800-32F Installation Manual

Hot Swappable Power Module Status LEDs

The hot swappable power module status LEDs help you determine the working status of a hot
swappable power module. Refer to
Table 1-9 Description of the hot swappable power module LEDs
LED
PWR1
PWR2

RPS Status LED

The RPS status LED helps you determine the working status of the RPS of the switch.
For the RPS status LED on an S5800-32C and S5800-56C, refer to
For the RPS status LED on an S5800-32C-PWR and S5800-56C-PWR, refer to
Table 1-10 Description of the RPS status LED on an S5800-32C and S5800-56C
LED
RPS
Table 1-11 Description of the RPS status LED on an S5800-32C-PWR and S5800-56C-PWR
LED
RPS
Table 1-9 for details.
Status
Hot swappable power module slot 1 is installed with a power
Steady green
module, and the power output is normal.
Hot swappable power module slot 1 is installed with a power
Steady yellow
module, but an output failure occurs.
No power module is installed in hot swappable power
Off
module slot 1, or no power is input.
Hot swappable power module slot 2 is installed with a power
Steady green
module, and the power output is normal.
Hot swappable power module slot 2 is installed with a power
Steady yellow
module, but an output failure occurs.
No power module is installed in hot swappable power
Off
module slot 2, or no power is input.
Status
Power input on the RPS interface is normal or the RPS is in
Steady green
position, and AC input on the AC power interface is normal.
Power input on the RPS interface is normal, but AC input
Steady yellow
fails or AC input is not connected.
Off RPS interface is not connected.
Status
Power input on the RPS interface and AC input on the AC
Steady green
power interface are normal.
Power input on the RPS interface is normal, but AC input
Steady yellow
fails or AC input is not connected.
Off Power input on the RPS interface is abnormal.
1-18
Description
Table 1-10 for details.
Table 1-11
Description
Description
for details.