Rear Panel; Ports; Console Port - H3C S5800-32F Installation Manual

Rear Panel

Figure 1-14 S5800-32F rear panel
(1) Hot swappable power module 1
(3) Hot swappable fan tray
(5) Grounding screw
(7) Management Ethernet port LINK status LED
The S5800-32F provides two power module slots on its rear panel. Hot swappable power module
slot 1 is empty when the switch is shipped, and hot swappable power module 2 is installed with a
filler panel. The above figure illustrates a switch with two PSR150-A AC power modules.
You can select one or two power modules for your switch as needed. See
Modules on page
Installing a Power Module
& PSR150-D Power Modules User Manual for the detailed description of the power modules.

Ports

Console Port

Each S5800 series provides one console port on the front panel.
specifications.
Table 1-2 Console port specifications
Item
Connector type
Compliant standard
Transmission baud
rate
Service
(1)
1-23 for the power module models supported by the S5800-32F, and see
on page 3-12 for the installation of power modules. See H3C PSR150-A
RJ-45
EIA/TIA-232
9600 bps to 115200 bps (defaulting to 9600 bps)
It can be connected to an ASCII terminal.
It can be connected to a serial port of a local or remote (through a pair of
modems) PC running terminal emulation program.
(2) (3)
(2) Hot swappable power module 2
(4) Management Ethernet port
(6) Management Ethernet port ACT status LED
Table 1-2
Specification
1-12
(4) (5)
(7) (6)
Hot Swappable Power
describes the console port