Connecting The Dc Power Cord For A Psr450-12D Power Supply - H3C S6825 Series Installation Manual

Figure2-34 Connecting the power cord for a PSR450-12AHD power supply (3)
Connecting the DC power cord for a PSR450-12D power
supply
1. Correctly orient the DC power cord connector and insert the connector into the power
receptacle on the power supply.
If you orient the DC power cord connector upside down, you cannot insert the connector into
the power receptacle.
2. Use a flat-head screwdriver to fasten the screws on the power cord connector, as shown in
Figure2-35.
3. Connect the other end of the power cord to a DC power source.
Figure2-35 Connecting the DC power cord for a PSR450-12D power supply
If the provided DC power cord cannot meet your connection requirements, use the following table to
prepare a suitable copper cable as the DC power cord.
2-24