Management Ethernet Port; Usb Interface; 10/100/1000Base-T Ethernet Port; 100/1000Base-X Sfp Interface - H3C S5800-32F Installation Manual

Management Ethernet Port

The S5800-32F provides a management Ethernet port on its rear panel. The port connects to a
computer to perform system program loading and debugging without being affected by the switching
chip working status; or connects to a remote network management station (NMS) to implement remote
management of the system.
Table 1-3 S5800-32F management Ethernet port specifications
Item
Connector type
Connector quantity
Port transmission rate
Transmission medium and
maximum transmission distance
Function and service

USB Interface

Each S5800 series provides a USB2.0 interface compliant with the OHC standard on the front panel.
The USB interface supports an upload and download speed of 12 Mbps. With this USB interface, you
can access the file system on the flash of the switch to upload or download application and
configuration files.

10/100/1000Base-T Ethernet Port

Each S5800 series (except the S5800-32F) provides 10/100/1000Base-T Ethernet ports on its front
panel. Table 1-4
Table 1-4 S5800 series 10/100/1000Base-T Ethernet port specifications
Item
Connector type
Interface standard
Max transmission
distance
Transmission medium
Standard

100/1000Base-X SFP Interface

The S5800-60C-PWR/S5800-32F provides 100/1000Base-X SFP interfaces on its front panel. You can
select the FE or GE SFP transceivers described in
RJ-45
1
10/100/1000 Mbps half duplex, full duplex
Category-5 twisted pair cable, with a maximum transmission
distance of 100 m (328.1 ft.)
Host software and Boot ROM upgrade, network management
describes the specifications of the 10/100/1000Base-T Ethernet ports.
RJ-45
10 Mbps, full duplex
100 Mbps, full duplex
1000 Mbps, full duplex
MDI/MDI-X, auto-sensing
100 m (328.1 ft.)
Category-5 unshielded twisted pair cable
IEEE 802.3i, 802.3u, 802.3ab
Specification
Specification
Table 1-5.
1-13