Model Menu Functions List - FUTABA 12FG Instruction Manual

MODEL MENU (AIRPLANE/GLIDER FUNCTIONS)
The dedicated mixes, etc. usable when airplane
or glider model type is selected are displayed in
this Model Menu functions section. First use the
Model Type function of the Linkage Menu to
preset the model type, wing type, and tail type
matched to the fuselage used. Other settings reset
the data used in mixing function, etc.
These dedicated mixes can be set for each
flight condition, as required. When you want to
use the system by switching the settings for each
EDIT

Model Menu functions list

AIL DIFFERENTIAL
This function adjusts the left and right ailerons.
also possible. This is convenient when making
[Airplane/glider, 2 ailerons or more]
FLAP SETTING
AIL to CAMBERFLP
This mix operates the camber flaps in
the aileron mode. It improves the operation
condition by switch or stick position, use the
(Up to 8 conditions can be used)
(Model Menu screen example)
*The Model Menu screen depends on the model type.
This screen is for model type 4AIL+4FLP.
S1 button
EDIT dial
EDIT button
characteristic of the roll axis. [Airplane/glider, 2
AIL to BRAKEFLP
mode. It improves the operation characteristic of
AIL to RUD
This mix is used when you want to operate the
rudder at aileron operation. Banking at a shallow
bank angle is possible. [Airplane/glider, general]
AIRBRAKE to ELE
This mix is used to correct operation of the
airbrakes (spoilers) when landing. [Airplane/
glider, general]
<Model Menu (Airplane/Glider Functions)>
S1
S1
E D I T
79