GYRO
is used to stabilize the aircraft's attitude. The
mode) can be switched with a switch.
EDIT
(For more information, see the
description at the back of this
manual.)
(Example) Setting 3 axes using a GYA351 and GYA352 (2 axes gyro)
*When separating the conditions, set to [SNGL].
front position.
Since switch E is turned OFF at the center, Rate 2 remains [INH].
*Initial setting does not assign a sensitivity channel. Use the
Function menu of the Linkage Menu to assign the sensitivity
beforehand.
Set [Control] and [Trim] other than Function to [--].
(Currently selected condition name)
S1 button
EDIT dial
EDIT button
<Model Menu (Airplane/Glider Functions)>
S1
S1
E D I T
99