Logic switch (Condition Select function only)
The logic switch function lets you turn operation on and off by combining two switches. For instance,
the condition is activated when 2 switches are turned on.
Logic mode
AND: When both switches are ON, the
condition is ON.
O R : W h e n e i t h e r s w i t c h e i s O N , t h e
condition is ON.
EOR: When the two switches are in different
states, the condition is ON.
Switch mode selection
1. Move the cursor to the [MODE] item and
push the EDIT button to switch to the data
input mode.
2. Turn the EDIT dial to the left and select the
[LOGIC].
*[LOGIC] display blinks.
3. Push the EDIT button to change to the logic
switch mode.
(Logic switch setting screen)
Swich selection
1. Select the switch A and B. (Refer to the
description at the previous page.)
FUTABA CORPORATION
Makuhari Techno Garden Bldg., B6F 1-3 Nakase, Mihama-ku, Chiba 261-8555, Japan
Logic mode selection
1. Move the cursor to the [LOGIC] item and
push the EDIT button to switch to the data
input mode.
2. Turn the EDIT dial to the left or right and
select the logic mode.
*The mode display blinks.
3. Push the EDIT button to change to the logic
mode.
4. To return to the preceeding screen, move
the cursor to the [SWITCH] at the top of the
screen and push the EDIT button.
Phone: (043) 296-5118 Facsimile: (043) 296-5124
©FUTABA CORPORATION
2007, 04 (1)
127
<Data>