Model Menu Functions List - FUTABA 12FG Instruction Manual

MODEL MENU (HELICOPTER)
This section contains information on the
commands that apply to helicopters only. For
instructions on Airplanes and Sailplanes, refer to
the sections pertaining to those aircraft.
Use the Model Type function in the Linkage
Menu to select the swash type matched to the
fuselage beforehand.
Also, add flight conditions at the Condition
Select screen if necessary before setting the model
EDIT
*Condition hold operation is displayed.
Model Menu functions (helicopter) list
PIT CURVE:
THR CURVE: Throttle curve and hovering trim adjustment
ACCELERATION: Allows a brief "overload" in response to sudden throttle and pitch commands
THR HOLD: Moves the throttle to idle during autorotation
SWASH MIX: Compensates for each control response
THROTTLE MIX: Compensates for power loss when cyclic applied
PIT to NEEDLE:
PIT to RUD: Handles torque changes from pitch angle inputs
GYRO: Used to switch gyro sensitivity
GOVERNOR: Used to switch RPM of the helicopter's head
106
<Functions of Model Menu (Helicopter Functions)>
data at each function. (Up to 8 conditions can be
used)
The AFR function, Dual rate function and other
functions common to all model types, are described
in a separate section.
S1 button
EDIT dial
EDIT button
To activate/deactivate Condition Hold:
*Refer to for condition hold function details.
S1
S1
E D I T