THROTTLE CUT
Throttle cut provides an easy way to stop the
at idle. The action is not functional at high throttle
to avoid accidental dead sticks. The switch's
location and direction must be chosen, as it defaults
to NULL.
EDIT
Throttle cut setting procedure
*Perform the following settings before using the EDIT dial to
move the cursor to the item to be set.
(For a detailed description of the setting method, see [Switch
Setting Method] at the back of this manual.)
(When the EDIT button is pressed for 1 second, the servo
operation position is reset to the initial value.)
62
<Functions of Linkage Menu>
S1 button
EDIT dial
EDIT button
*With the selected cut switch ON and the throttle stick at idle;
adjust the rate until the engine consistently cuts off.
However, be sure that the throttle linkage is not pulled too
tight and unreasonable force is not applied to the servo.
S1
E D I T