Afr - FUTABA 12FG Instruction Manual

AFR function is used to adjust the throw and
operation curve of the stick, lever, and switch
functions (CH1 to CH12, and V1 to V4) for each
flight condition. This is normally used after End
Point has defined the maximum throw. When
mixing is applied from one channel to another
channel, both channels can be adjusted at the same
time by adjusting the operation rate through the
AFR function.
EDIT
74
<Model Menu (Common Functions)>
(Currently selected condition name)
(For a description of the setting method, see the
description at the back of this manual.)
(Number of D/R curves set at the currently
selected condition)
Function selection method
*The setting mode (group [GROUP]/single [SNGLE] mode) can be switched (For more
information, see the description at the back of this manual.)
[AFR/D/R]: Displays the currently
selected rate (AFR/D/R).
S1 button
EDIT dial
EDIT button
(For a description of the setting
method, see the description at
the back of this manual.)
(For more information, see the description at the back
of this manual.)
S1
S1
E D I T