FUTABA 12FG Instruction Manual page 77

(For a description of the setting method, see the description
at the back of this manual.)
*Perform the settings below after using the EDIT dial to
move the cursor to the item you want to set.
*The mode changes to the single mode [SINGLE].
*When using common settings at each conditions, remain in
the [GROUP] mode.
*The function is activated. (ON or OFF display)
*ON/OFF switch and mix rate are not set even through the
function is activated.
(For a description of the switch setting method, see the
description at the back of this manual.)
(For a description of the setting method, see [Switch Setting
*Always on when [--].
*Check the direction by actual operation.
*Master channel control can be set to simple operating
(For a description of the setting
method, see the description at
the back of this manual.)
Method] at the back of this manual.)
amount of sticks and VR which do not include ATV, AFR,
D/R, and mixing setting. In this case, the switch setup
screen is displayed by pushing the EDIT button with "H/W"
selected by function selection. Select master channel side
control. (To terminate the "H/W" selection, select the [--]
display and push the EDIT button.
<Model Menu (Common Functions)>
77